Theta Controls brings you a wide range of Industrial Networking solutions from the pioneers and market leaders, Hirschmann Electronics, Germany.
Ethernet is now the choice of the network for communication between various industrial controllers and the SCADA, due to its speed and widely available hardware at an affordable price. However, when you are using it in industrial environment, you must use an industrial grade device, and not an office grade one. This is explained below
Ultra-hardened switches, fully configurable operating temperature -40 ‘C to +85 ‘C, optionally for all variants 4 PoE ports
Fast/Gigabit Ethernet switches designed for use in harsh industrial environments
RS20, RS30, RS40, RS22, RS32 :
Fully configurable managed switches with selectable
MS20, MS30, MSP30, MSP32, MSP40, MSP42 :
Full Gigabit managed modular switches with selectable features and approvals as well as user hotswappable media modules for almost limitless copper/fibre combinations.
RSP Series :
Hardened managed switches with the new HiOS operating system
Cost-effective fast Ethernet redundancy entry-level switch supporting PRP, HSR or DLR Offered in two, four-port version:
RSR20, RSR30 :
Ultra-hardened switches, operating temperature -40 ‘C to +85 ‘C, DC or AC power input
Fast Ethernet RSB switches with basic software version
Lite managed switch
BOBCAT Series (With TSN) :
The first industrial switch worldwide to provide advanced security and real-time communication through time-sensitive networking(TSN) technology on all ports for standardized Ethernet usage in event the most demanding application
Managed Full Gigabit PoE/PoE+Switches
Spider, Spider II, Spider III :
RS20, RS30 :
Feature-rich unmanaged switches with selectable port types, features and approvals
Hardened Enterprise-grade switches
High density and high speed backbone switch with layer 3 /routing and speeds up to 10 Gigabit
DRGON MACH4000 :
Meets the relevant industry standards, providing
very high operational reliability, ever under
extreme conditions and also long term reliability
& flexibility with all advanced HiOS Layer 3
BAT Access Points/Clients :
EAGLE/Tofino Xenon :
Network segmentation, VPN and deep packet inspection.
Industrial HiVision :
Hirschmann Fiber- Profibus Conv :
Hirschmann Fiber- RS485 Conv :
Hirschmann Fiber- Genius Bus Conv :
IOLAN DS/SDS :
End devices with a serial interface can be easily and reliably connected to ethernet network
Secure Remote Access Solution :
A simple and secure way to provide remote network access and diagnostics through a three-component system:
Single box cellular routers offering high speed wireless connectivity and remote access options.
and factory tested cordsets
Extending the reach of copper for serial &
fieldbus protocols via fiber
THETA has been developing Controllers and Instruments, mainly for DRDO, for the last 30 years. Many of the units developed by us have gone in production / field use.
We had been involved with the development of ROV 'Daksh' for several years, and had developed several major subassemblies for it. We were also privileged to be selected as one of the 4 production partners for manufacturing complete
Theta is also involved in other projects of R&DE, like the SROV, CSROV, UXOR etc.
We are presently working with multiple users across Various DRDO's, PSU's and also private Defence Manufacturers. We handle development of units as per required specifications, and also manufacturing capabilities to provide required
SROV –System consists of the following
Daksh is a remotely operated robotic vehicle for multipurpose applications in hazardous environments. It is designed to be a valuable equipment for Army/Paramilitary forces in challenging missions. One lot has been supplied for IED (Improvised Explosive Device) retrieval.
ROV-Daksh system consists of the following
CSROV –System consists of the following
Remote Control Unit :
Local Control Unit :
Remote Digital IO :
Video Multiplexer :
Drive Unit :
Operator Console Unit :
Cable Drum - Fibre Optic :
Cable Drum - Electrical :
Laser Pointer :
Power Distribution Unit :
Zoom Camera :
Operating Console Unit :
Master Control Unit :
Digital Cone Penetrometer :
Ethernet to 8 port Serial :
Water Current Meter :
Theta has made Test Equipment for the various equipment it has developed. Many of them have been supplied to our Customers like R&DE, BEL, Mahindra Defence, as well to the End Users, MOD
We have also made an integrated Test Equipment for MOD, which can test around 10 units which were manufactured by us for ROV 'Daskh'
While most of the test units made are operated manually, we have also made Automated Test Equipment, which are controlled by the PC.
Theta is a distributor of hirschmann for over 20 years & have the capability of giving complete support for networking solutions, including design. We can now ruggedize those switches for you to conform to JSS-55555 applications, for land and sea. We can offer both managed and unmanaged switches, including PoE ports.
Theta Controls & Systems Pvt. Ltd. - the newest entrant to our group is a one stop shop for all Automation and Energy-related requirements. Formed as part of our constant endeavour to reinvent ourselves and to serve our customers better, we decided to merge our complete Automation, Energy and Sensors business under a single entity.
This company is an amalgamation of three business units - Kontrelek Instruments (Autonics), Theta Controls (Process Instruments Division - Brainchild and Jaki products) and Cologicx Systems Pvt Ltd (energy-related test and measurement solutions).
We believe in long-term partnerships with our customers to best meet their needs and requirements on an ongoing basis.
LCD PID Controllers :
Our atest TH.PID 1 series with many innovations
PID Controllers :
Profile Controllers :
IO Modules on RS485 :
Panel PC :
Paperless Recorder :
Can have built in PID controls as well
Hybrid Recorders :
PID/Process Control Card for Paperless Recorders :
Theta Power Regulators :
Options available in Phase Angle and Zero Cross control
Jaki Thyristor Power Regulators :
Digital Thyristor Power Control Unit :
Thyristor Switches For Capacitors :
1 Phase / 3 Phase SSRs :
Magnetic Sensors :
The MGS1600GY is a sensor capable of detecting and reporting the position of a magnetic field along its horizontal axis. The sensor is intended for line following robotic applications, using a magnetic tape to form a track guide on the floor.
Brushless DC Motor Controller :
Brushless DC motors run quieter, with reduced wear and higher reliability. They are increasingly the preferred choice in electric vehicle and industrial system. Choose from over 10 product references of single and duall channel controllers ranging from 30A to 150A per channel. All Roboteq controllers share advanced features, including:
Brushless DC Motors :
Brushless DC or BLDC motors for a wide range of applications.
PMDC / Brushed DC Motor Controller :
Permanent Magnet / Brushed DC motors are the most common and least expensive motor types. Chose from over 30 product references of single and dual channel motor controllers for brushed DC motors, ranging from 20A to 500A per channel. All Roboteq controllers share advanced features, including:
PMDC / Brushed DC Motors :
Brushed DC or PMDC motors for a wide range of applications.
Stepper Motor Drives :
Stepper Motors :
Serial to Wi-Fi Convertors :
USB TO RS-485 Convertors :
Sensors,Transmitters and Interface Modules :
No Control system is complete without the correct set of accessories. For the convenience of our customers, we carry an entire range of accessories that are required to interface with our systems. Each of these products provides a high level of Accuracy, Quality and is tested with the unit it will be used with. For higher accuracy requirements, the Sensor and the Required unit (Recorder / Controller) can be calibrated as a set and NABL certification for the same is also available. Some of the products usually required with these systems that are available with us are listed below:
Furnace Control Panels :
HMI / Paperless Recorder Panels :
Portable I/O Simulators :
Portable Paperless Recorders :
- 12 Temperature Inputs
- 10 Thermocouple + 2 RTD
- 12 Pressure Sensor Inputs
- Dual Power Supply - 230 V AC OR 11 - 36 V DC
-High-speed Pulse input ( 4,500 Hz+)
- DC Voltage measurement
- Provision for Ethernet and RS485 connections
on the front panel
Field Testers - Temprature / Pressure :
CGX-kWh-03 Multifunction Meter :
Measures Active, Reactive, Apparent Energy, Power and THD, along with all the other energy parameters-V1, PF etc.
EGCP Series AMF Controllers (Model EGCP-03, EGCP-04T) :
Non Contact Vibration Sensor/ System :
Non- Contact Diameter Scanner :
Counters / Timers :
Pressure Sensors and Transmitters :
Measurement and Indication (Indicators / Panel Meters / Display Units) :
Rotary Encoders :
Door / Area Sensors :
Interface Units :
Optical Sensors (Colour Mark / Photoelectric) :
Control Switchgears and Accessories :
Surge Protection Devices :
With expertise in several aspects of engineering technology, THETA has developed and delivered wide variety PC based solutions to numerous customers in various industry segments.
TMCS Pvt. Ltd. is associate company of Theta Group of companies and a Silver Alliance Partners of National Instruments. We have 20 years of experience in building NI hardware based systems & have over 1 million man hours of experience right from LabVIEW 5.0 till date
We provide End to end Solutions:
Automated Test Equipment / End of Line Tester :
Motor, Alternator Test System:
Shock Absorber Test System:
Electrical Contactor Test Bench:
Car Door Handle Tester :
Gear Box Testing:
Body Control Module :
Ultra High Speed Switch tester :
Generator test system :
Data Acquisition Systems (DAQ) :
Chiller monitoring System:
Customized of Power Analyzer:
Crank Shaft hardening:
DAQ for Gear profile :
DAQ for PID :
Temperature and Energy monitoring system:
DAQ for flow meter calibration
DAQ for Calorimeter
Distributed Gauging system:
NI Hardware Trading :
THETA bring you a range of IoT devices & units as well as useful Development Tools from Tibbo Technology.
What THETA can do for you the pioneers in developing serial-over-IP (SoI) controllers (a.k.a. “device servers” or “serial-to-Ethernet converters”), modules, and related PC software. Tibbo’s SoI products remain popular to this day.
Tibbo undertook to become a leader in hardware and software solutions that simplify and speed up the creation of IoT and automation devices.
Brought to you by TIBBO Technologies, Taiwan.
A powerful range of cost-effective, easy-to-use, Basic & C Pro
- Easy to upload / download program
- Easy to debug program without any additional hardware
For more details & TIDE download visit - www.tibbo.com
EM 203+ RJ45 :
EM 500/510 :
EM 100-04 :
DS 1102 :
RS232/422/485/ MODBUS Port
3.5 - RS232 Port
Rapid Prototyping of Hardware :
Normally, for any project, there is a need to quickly prove the system, without having to wait for hardware development. And, athe
required quantity is small, it makes even less sense to develop/procure/ debug the hardware
Presenting TPS. It is a modular system. Just assemble the I0 modules in the empty slots of the base board, to
choose the functionality you need. No soldering, no drilling, And put the whole PCB in the enclosure your unit can be ready for trais
in less than an hour
You have two options of base boards (which includes Tibbo programmable controller and a power supply) and a wide variety
of O Modules to choose from. You even have a sturdy exercise to go with it.
The Tibbo controller programs in Tibbo Basic or "C" or both
PCB Boards :
IO Modules - Over 50 type available :
A Professional, scriptable, multi-purpose terminal emulaor, network sniffer and IO monitor
Taps and monitors I2C and spi communications
Taps and monitors RS232, RS485, & TTL-level UART communications
works as standard USB-to-RS232/485 adaptor, but with WebUSB support
Dino-Lite digital microscope provides a powerful, portable and feature rich solution for microscopic inspection at up to 900x magnification with variety of resolutions. With high quality imaging optics you can easily see magnified images instantly onto your computer or projected onto large screen. A wide range of stands and accessories completes the product line-up and ensures that the Dino-Lite range offers solutions to meet the needs of the home user, through to the most demanding professional.
This is just one small example of the many ways our products redefine the microscope. Over 150 models available to choose from that will exceed your expectations
Dino-Lite Edge 3.0 :
Dino-Lite Edge :
Dino-Lite Premier :
Dino-Lite Egde :
DinoLite Egde PLUS :
Dino-Lite Premier :
The RK-04 is Robust, lightweight and compact rack design. The Dino-Lite RK-04 rack is designed with portability and convenience in mind
The Dino-Lite RK-06 tabletop stand is designed for general purpose but built with quality. With smooth focus adjustment and quick vertical movement. The ease-of-assembly and adaptable extension arm design adds further mobility and flexibility to user’s applications.
If you want to observe your object or specimen from a different perspective, the Dino-Lite RK-05 stand provides a multi-angle view with its 30 degrees inclinable pole feature. RK-05 is a light-weight, ultra-portable stand with a one-step assemble/disassemble design.
The RK-10 features a quick release button for fast and convenient vertical movement and a fine-focus adjustment knob that is especially useful at high magnification. This model also includes an adjustable safety stop that helps prevent accidental collisions between the microscope and the object under view.
The RK-02 is a durable gooseneck rack designed for flexible and ergonomic usage for Dino-Lite. The C-clamp of RK-02 fits to most desk surface or pole up to 3-inch in thickness, horizontally or vertically. With excellent shaping capability of the gooseneck arm, the Dino-Lite can be easily positioned by bending the arm and by adjusting the rotating head.
Articulating flex-arm and desktop base rack for tightening and positioning the arm for examining 360 degree rotation with microscope.
An articulating desktop clamp allows you to clamp a stand onto a tabletop or attach to any surface up-to 3cm thick.
Is economical and rigid vertical desktop stand designed in such a way that it gives 360 degrees of horizontal axis rotational perspective.
Industrial Microscopes :
PCB Microscopes :
Medical Microscopes :
Dermatology / Nail Circulation / Iridology / Trichology / Laboratory / Veterinary
Laboratory Microscopes :
Forensic Science Microscopes :
Hobbies / Jewellery / Coins / Stamps / Antiques / Art restoration / Culture preservation
Natural Science Microscopes :
Educational Microscopes :
Jewerly/ Collectibles :
UV 395nm With MSAA502 :
Without Fluorescence and With Fluorescence :